Spa Tec-Blog

 

DIY: Replacement Electronic Control System for Soft Heat Saunas Now Available

Picture
  Today we renovated a Soft Heat Sauna. Original problem was that the unit just would not heat up. After testing the system I determined that the Electronic Control box had failed. After some research, I found out that Soft Heat the sauna manufacturer had gone out of business and no parts were available. I then contacted several manufactures and found one that one built a system that would directly replace the Soft Heat Electronic Control Box and Digital Display Panel, while reusing the original power supply cord, limit switch and lamps.
This System saved the customer a lot of money since they did not have to pay for new lamps and labor to retrofit the existing ones. All the lamps plug in exactly the same way to the Control Box and the smaller Digital Display Panel comes with a 5" wide by 7" tall Adapter Plate to fit the existing Control Panel hole. Mount the new Temperature Probe, plug the cord into the power supply and it was back to enjoying the sauna. Contact Spa Tec or Click http://www.spatecservice.com/soft-heat-infrared-sauna-repair-and-parts.html for further details on how you can obtain this replacement System. Happy Hot Sauna! Jeff at www.SpaTecService.com

Picture
Original Control Panel
Picture
New Control Panel. Click to Enlarge.
Picture
New Control Box with Digital Control Panel and Adapter Plate. Click to Enlarge.
Picture
Lamp Plug Connections View. Click to Enlarge.
Picture
Power Supply View. Click to Enlarge. Available in 120 volt and 240 volt input.